Modify Selection
- Research methods and measures:
- Measures
- or
- Accidents
- or
- Fatalities
- or
- Sound power level
- or
- Temperature
- or
- Costs
- or
- Workers' compensation costs
- or
- Sound level
- or
- Injuries
- or
- Rates
- or
- Injury rates
- or
- Fatality rates
- or
- Non-fatal days lost rates
- or
- Occupational illnesses
- or
- Electrical measures
- or
- Voltage
- or
- Conductance
- or
- Electrical resistance
- or
- Absorption
- or
- Explosive limits
- or
- Mechanical strain
- or
- Airflow
- or
- Mechanical stress
- or
- Exposure limits
- or
- Permissible exposure limits
- or
- Recommended exposure limits
- or
- Particulate matter measures
- or
- Organic carbon fraction
- or
- Total dust level
- or
- Elemental carbon fraction
- or
- Respirable dust level
- or
- Particle count
- or
- Total carbon
- or
- Particle size distribution
- or
- Transmittance
- or
- Humidity
- or
- Pressure
- or
- Flammability
- or
- Ground stability
- or
- Convergence
- or
- Cleat
- or
- Roof quality
- or
- Slope stability
- or
- Horizontal stress
- or
- Weak rock
- or
- Dose
Home Links
Results 61 - 70 of 514
-
8/1/2001 - Conference papersThis paper introduces warning signs of slope instability so operators are better able to recognize hazards. The most common slope monitoring equipment and practical methods of installation are discussed as well as the limitations of these systems.
-
8/1/2001 - Peer reviewed journal articlesThe CMRR quantifies defects in the rock mass and compiles a strength value used for engineering design. The CMRR has been applied to a number of ground stability problems. The CMRR procedure and some of these applications are described in this paper.
-
2/1/2001 - Conference papersEvaluation of the "Advance and Relieve" mining method is described to determine effectiveness for conditions where high horizontal stresses caused long running roof falls resulting in hazardous conditions and the premature abandonment of panels.
-
11/1/2000 - Peer reviewed journal articlesThe Roof Monitoring Safety System (RMSS) is described, compared to other roof-monitoring technology, and described in context with proactive ground control plans for stone mines.
-
8/1/2000 - Conference papersTo determine causes of slope failure and highwall/spoilbank failure, this study reviews accident statistics, surface mining laws, the relevant literature, and observations from mine visits. The study emphasizes surface mines in WV, OH, and PA.
-
7/1/2000 - Reports of InvestigationsShort-dumping rather than edge-dumping might reduce dumping-related accidents, but many operators believe it is less cost effective. To evaluate this perception, NIOSH reviewed the costs of various dumping methods at waste and spoil piles.
-
1/1/2000 - Conference papersThis paper outlines the evolution of the RMSS and how it can be used in a comprehensive, proactive ground control safety program. A case history describes the RMSS being used to evaluate a mechanical impact sealing machine at a limestone mine.
-
1/1/2000 - Conference papersThe practical application of the "advance and relieve" method is discussed. A trial of the method was conducted for a room and pillar coal operation that was experiencing roof cutters and long running roof falls caused by high horizontal stresses.
-
3/1/1999 - Conference papersHigh-resolution hyperspectral imagery operating in the visible to shortwave infrared can help identify and map argillic zones in host rocks; these zones add a significant risk in assessing and modeling catastrophic slope movement in open-pit mines.
-
8/1/1998 - Conference papersA design technique is presented which provides stone miners with a method for making stability assessments. The consequences of widening rooms, changing geology and horizontal stresses, and different rock bolts on roof beam failure are discussed.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program